Products | RFID Inlay & Tag Manufacturing | RFID Testing & Validation Equipment
rfid testing & validation equipment
RFID
Testing & Validation Spec Sheets
TVS-2500R
The TVS-2500R takes automated
transponder validation to the next level
by adding a pick and replace mechanism
for failed tags; producing complete
rolls of 100% fully validated tags
without the traditional and potentially
destructive process of manually adding
and removing tags. Designed as a
fully automated, stand-alone transponder
tester/encoder, the Pressiza® TVS-2500R
is capable of testing, encoding, and
replacing tags at a rate of 140 per
minute with an accuracy of +/- 1/32 of
an inch.
TVS-1000
The TVS-1000 provides a
dramatically improved method for
encoding and validating RFID
transponders embedded in lightweight,
flexible substrates. The Pressiza®
TVS-1000 is capable of testing
transponders and/or encoding them
without human intervention. While
a PLC advances tags one at a time under
the verifying reader, the Flexolution®
RFID TVS Software initiates the testing
process. If the read is successful
the tag is advanced, if the read fails the
software advances the tag only after
identifying it as bad.
TVS150
The TVS150 is the smallest and
most portable stand alone validation
system in RSI's line of industry leading
testing equipment. With embedded
Flexolution®
TVS software, a touch screen
display, and the familiarity of a
Windows OS, the TVS150 there is no need
to connect to a laptop - just plug it in
and begin testing. Simple green and
red screens indicate test results and
leave no ambiguity as to whether a tag
has passed or failed.
To speak with our Inlay & Tag Manufacturing group call 619.656.2515 or contact us